Solid Know How™

Article#258

Wi-Fi Setup on Janam XM66 Handheld

How to configure your Janam XM66 handheld to connect to the WLAN:

1. Tap on [Start / Settings]
2. Select the [System] tab
3. Tap on the WiFi icon
4. In the "Active Profile" drop-down list change from "Default" to "ThirdPartyProfile"



5. You will get the following pop-up message: "A power cycle is required to make settings activate properly", tap "OK"
6. Power off the handheld
7. Power on the handheld
8. Tap on [Start / Settings]
9. Select the [Connections] tab
10. Click on the Wireless Manager icon



11. Select on [Menu / Wi-Fi-Settings], this takes you to the "Configure Wireless Networks" screen with all the available wireless network the device can find



12. Select the appropriate wireless network. If it has not been configured it will take you to a configuration screen showing the Network name and a "Connect to" drop-down list
13. Select "The Internet", and click [Next]
14. Select the appropriate "Authentication" and "Data encryption" for the wireless network you wish to connect to, e.g. WPA-PSK and TKIP, and if necessary enter the network key
15. Click [Next] and the click [Finish]
16. The handheld will now connect to the wireless network
17. You will now be taken back to the "Configure Wireless Networks" showing which wireless network the mobile device is connected to

Related Articles

No related articles were found.

Attachments

No attachments were found.

Visitor Comments

No visitor comments posted. Post a comment